WolfPack DT2211 Manual De Instrucciones página 38

REMOVE THE PLUG FROM THE MAINS SUPPLY
 Before leaving the Vac-Blower unattended for any length of time;
 Before clearing any blockage;
 Before checking, cleaning or carrying out any work.
 If a foreign body or other debris is accidentally feed into the Vac-Blower, stop it
immediately and do not use the Vac-Blower until it has been checked and you are sure
that the entire Vac-Blower is in a safe operating condition.
 If the Vac-Blower makes any unusual noise or starts to vibrate abnormally, STOP it
immediately, remove the plug from the mains supply and investigate the cause.
Excessive vibration can cause damage to the Vac-Blower and injury to the operator.
RESIDUAL RISKS
Even when the tool is used as prescribed, it is not possible to eliminate all
residual risk factors.
The following hazards may arise in connection with the tool's construction and
design:
1) Damage to lungs if an effective dust mask is not worn.
2) Damage to hearing if effective hearing protection is not worn.
3) Health defects resulting from vibration emissions if the power tool is being used over
a longer period of time or not adequately managed and properly maintained.
WARNING! This machine produces an electromagnetic field during
operation. This field may under some circumstances interfere with active
or passive medical implants.
To reduce the risk of serious or fatal injury, we recommend that persons with medical
implants consult their physician and the medical implant manufacturer before operating
this machine.
38