Publicidad
Fully Programmable via GPIB, RS232 or USB
The XDL 35-5P and XDL 56-4P incorporate a full bus interface permitting remote control and
readback via either GPIB (IEEE-488), RS232 or USB.
The GPIB interface conforms fully with IEEE-488.2 and IEEE-488.1.
The serial interface can be used as a conventional RS232 interface or as part of a multi-
instrument addressable RS232 chain.
USB represents the future for medium speed PC connectivity. By adding USB hubs, multiple
devices can be connected. A Windows device driver is supplied which creates a virtual COM
port, enabling USB to be used with applications that do not directly support it.
XDL series supplies use simple and consistent command structures which make programming
particularly easy regardless of which interface is used.
A National Instruments LabWindows* device driver is available.
All power supply settings can be controlled via the bus. Voltage and current can be set to a
resolution of 1mV or 0·1mA. Actual voltage and current can be read back together with the power
supply status.
* LabWindows is a trademark of National Instruments Corp.
4
Publicidad
