Lenco BTC-060 Manual De Usuario página 7

Function Definition
1. Power: long press "M/Power" button to power on, short press to switch selection;
2. Play/Pause: short press to pause, long press to switch lights (5 lights optional);
3. Next/Previous/Volume up/down: short press to switch the next/previous song, long press to
increase or decrease the volume;
4. Microphone minus/plus: adjust the volume of the microphone;
5. INPUT: After plugging in the USB-drive, press the INPUT button to start recording, and then
press again to pause, the song is saved to the USB-drive and played automatically. (Fig. 1.3 on
the right);
Note: (Only the sound of the microphone can be recorded.)
6. Vocals: elimates or lower the vocals of the original
song. DC IN: The red light stays on during charging and
goes out when fully charged;
7. USB IN: Automatic recognition when USB is inserted;
8. AUX IN : Automatic recognition when Aux cable is
inserted;
9. MIC IN: 6.35mm jack
Remote Control Definition
1. Power on/off
2. Light
3. Bass adjustment
4. Treble adjustment
5. Female to male
6. Male to female
7. Original Sounds
8. Baby Sounds
9. Microphone volume up and down (wireless and
wired)
10. Volume up and down
11. Next and Previous
12. Play/Pause
13. Echo -
14. Echo +
15. Sound effects
16. Vocals: elimates or lower the vocals of the original
song.
7