Sangean HDR-19 Guia De Inicio Rapido

HDR-19
03
Note:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guaranty that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio / TV technician for help.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the
risk of the electric shock, do not perform any servicing other than that contained in the
operating instructions unless you are qualified to so.
VERY IMPORTANT PLEASE READ
Sangean suggest that you keep your AC Adapter at least 12 inches away from the radio
while listening to the AM Band.
Your Sangean Radio is powered by an AC adapter which is a "switching" or "switch-mode"
type. The DOE (Department Of Energy) has a Federal mandate; requiring all manufactures
to use this type of power supply. This newer power saving technology has the unfortunate
side effect of causing interference to the AM radio band.
Therefore, we recommend that customers keep at least a 1 foot distance between the
AC adapter and the radio. This interference will not affect the FM Band. If you have any
questions please contact customer service at (562)941-9900 or service@sangeanus.com.
If an AC adapter isn't included in this model and if you wish to purchase an AC Adapter
separately, please refer to the specifications for the AC Adapter stated on the final page of
the manual, or please contact Sangean for the correct AC Adapter and specifications.
01
GB
For full documentation on all of the HDR-19's functionality, please visit the website below or scan
the QR code to download the full manual.
HD1- HD5
E
Para obtener la documentación completa sobre todas las funciones de la HDR-19, visite el sitio
web a continuación o escanee el código QR para descargar el manual completo.
GB
For Canada:
Cautions to the user
The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
RF exposure statements
To comply with the IC RF exposure compliance requirements, the antenna (s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be colocated or operating in conjunction with any other antenna or transmitter. No
change to the antenna or the device is permitted. Any change to the antenna or the device could
result in the device exceeding the RF exposure requirements and void user's authority to operate
the device.
This device complies with Industry Canada licenceexempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
FR
Pour le Canada:
Attention à l'intention de l'utilisateur
Tout changement ou modification non expressément approuvés par la partie responsable de la
conformité peut entraîner l'annulation du droit de l'utilisateur à utiliser cet appareil.
Énoncé sur l'exposition aux RF
Pour répondre aux exigences de conformité à l'exposition RF IC, l'antenne utilisée avec
l'émetteur doit être installée pour permettre une distance de séparation d'au moins 20 cm de
toute personne et ne doit pas être placée à côté ou fonctionner conjointement avec une autre
antenne ou un autre émetteur. Aucun changement sur l'antenne ou sur l'appareil n'est autorisé.
Tout changement sur l'antenne ou l'appareil pourrait amener l'appareil à dépasser les exigences
d'exposition RF et annuler le droit de l'utilisateur d'utiliser l'appareil.
Le présent dispositif est conforme aux CNR d'Industrie Canada applicables aux appareils
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) le dispositif
3A87g90S10030 ne doit pas produire de brouillage, et (2) le dispositif doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible.
04
To learn more about the DOE mandate please visit http://www1.eere.energy. gov/buildings/
appliance_standards/product.aspx/productid/23
Please note not all AC adapters are alike.
The AC adapter that is included with this radio is designed to be used exclusively with this device.
Do not use an AC adapter that differs from the specifications on the AC adapter that is included.
If an AC adapter is NOT included with your radio and in order not to damage the unit and void your
warranty, specifications for the AC Adapter are stated on the final page of the manual, or please contact
Sangean for the correct AC Adapter and specifications. For customers in the US and Canada, please
call 562-941-9900. For all other areas, please contact us via contact@sangean.com.
Do not use an AC adapter that does not meet the correct specifications.
Cautions
Do not allow this radio to be exposed to water, steam or sand. Do
not leave your radio where excessive heat could cause damage
such as in a parked car where the heat from the sun can build up
even though the outside temperature may not seem too high.
● Your radio should not be exposed to dripping or splashing water and that no objects filled with
liquids, such as vases, shall be placed on the radio.
● It is recommended to operate the product such that there is a minimum distance (4"
recommended) to adjacent objects in order to ensure good ventilation.
● The ventilation of the product should not be restricted by covering it or its ventilation openings
with items such as newspapers, tablecloths, curtains etc.
● No open flame sources such as lighted candles should be placed on the product.
● It is recommended to avoid using or storing the product at extreme temperatures. Avoid leaving
the unit in cars, on window sills or in direct sunlight etc.
Connecting and powering on the radio
The HDR-19 can be powered using the
supplied AC power adapter. Connect the
power adapter to the radio's DC IN
socket at the back of the radio and then
plug it into a wall socket supplying
100~240 Vac, 50/60 Hz. When "Set
Time" is shown on display with the hour
digits flashing, it indicates that the time
is not yet set. Your radio will prompt you to configure the time and date by rotating the Tuning
https://us.sangean.com
02
ES
Para Canadá:
Precauciones para el usuario
Los cambios o modificaciones que no hayan sido expresamente autorizados por la entidad
responsable por el cumplimiento de las regulaciones podrían anular la autoridad del usuario
de utilizar este equipo. Declaraciones sobre la exposición de.
radiofrecuencia (RF)
Para cumplir con los requisitos de exposición humana a los campos de radiofrecuencia
(RF) de la IC, la o las antenas usadas para este transmisor deben instalarse a una distancia
mínima de 20 centímetros de cualquier persona y no deben ser colocadas ni funcionar junto
a otras antenas o transmisores. No se permite ningún cambio en la antena o dispositivo.
Cualquier cambio en la antena o dispositivo podría resultar en el dispositivo excediendo los
requisitos de exposición humana a los campos de radiofrecuencia y anular la autoridad del
usuario para operar el dispositivo.
Este dispositivo cumple con el/los estándar(es) RSS para estar exento de licencia para la
industria canadiense.
La operación queda sujeta a las siguientes dos condiciones: (1) este dispositivo no deberá
causar interferencia y (2) este dispositivo debe aceptar cualquier interferencia recibida,
incluyendo la que pueda originar un desempeño indeseable del dispositivo.
GB
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and
Foreign Patents. For patents see http://dts.com/patents. HD Radio and the HD, HD Radio,
and "ARC" logos are registered trademarks or trademarks of iBiquity Digital Corporation in the
United States and/or other countries.
The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by SANGEAN ELECTRONICS INC. is under license.
Important safety instructions
For United States:
Cautions to the user
The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
RF exposure statements
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20cm (8 inches) from
all persons and must not be colocated or operating in conjunction with any other antenna or
transmitter. No change to the antenna or the device is permitted. Any change to the antenna or
the device could result in the device exceeding the RF exposure requirements and void user's
authority to operate the device.
05
button to select the hour. Then push in and release the Tuning button to confirm your
selection. Please repeat these steps to complete the time and date setup. After configuring the
time and date, the radio will return to the Standby mode and it can be powered on by pressing
the Power / Sleep button.
Note:
The instructions in this Quick Start Guide all use the controls on the radio itself. All functions
can also be controlled using the corresponding buttons on the remote control.
Listening to AM / FM radio
1. Turn on the radio by pressing and releasing the Power / Sleep button.
2. Repeatedly press and release the Mode button to select the AM or FM radio mode.
3. You can select stations by rotating the Tuning button clockwise or counterclockwise or you
can push in and release the Tuning button to automatically scan for the next station with a
higher or lower frequency respectively. Press the HD Seek button to automatically scan for
the next HD Radio™ station with a higher frequency, or press and hold the HD Seek button
for 2-3 seconds then release to automatically scan for the next HD Radio™ station with a
lower frequency.
4. Rotate the Tuning button clockwise or counterclockwise in order to fine-tune the frequency,
if needed.
5. Rotate the Volume button to increase or decrease the volume as needed.
6. Storing a preset: After tuning into a station, press and hold the Preset / Bluetooth pairing
button for 2-3 seconds then release or until a beep is heard. The radio's LCD will display
shows "Preset Store", rotate the Tuning button to select the desired preset number and
press the Tuning button to confirm your choice.
Recalling a preset: To recall a preset simply press and release the Preset / Bluetooth
pairing button and then select the desired preset station by rotating the Tuning button.
Then push in and release the Tuning button to confirm your selection.
Using the radio's menu
The radio's menu can be used to configure the radio's AM / FM region, and to set the clock
and features such as the snooze time and emergency alerts. Follow these steps to open and
navigate the radio's menu:
1. Press and hold the Info / Menu button for 2-3 seconds then release to access the radio's
menu.
2. Rotate the Tuning button left or right to select a menu option.
3. Push in and release the Tuning button to confirm your selection.
4. Repeat steps 2 and 3 if the item or option that is selected require additional configuration.
Note:
Options that are specific for a certain mode (e.g. the AM region) can only be accessed by
accessing the menu while in AM mode.
Quick Start Guide