Textron JACOBSEN TR3 Manual De Seguridad, Funcionamiento Y Mantenimiento página 68

11 TROUBLESHOOTING
11.2.5 SCALPING
NOTE: Arrow indicates direction of travel.
Probable Cause
HOC (height-of-cut) settings are lower
than normal.
Improper reel-to-bedknife adjustment.
Turf too uneven for the mower to
follow.
Cutting too much grass at one time.
Mowing (ground) speed is too fast.
en-68
SAFETY, OPERATORS & MAINTENANCE MANUAL
Scalping is a condition in which areas of grass are
cut noticeably shorter than the surrounding areas,
resulting in a light green or even brown patch. This
is usually caused by an excessively low height-of-cut
(HOC) setting and/or uneven turf.
Remedy
Check/adjust the HOC settings.
Adjust reel-to-bedknife setting for desired HOC.
Change mow ing direction.
M ow more often.
Reduce mowing (ground) speed.
JACOBSEN TR3