Publicidad
Idiomas disponibles
Idiomas disponibles
d)
The generating set shall not be connected to other power sources, such as the power company
supply mains.
2.2.
Engine operation safety
a)
Do not smoke near the device. The device contains flammable substances.
b)
W The engine gets very hot during operation. Do not touch the hot engine because it may cause
urns.
c)
Add oil till the full marking before start using the device.
d)
Oil leaking from the machine should be reported to the appropriate services or comply with legal
equirements applicable in the area of use.
e)
Danger! Danger to health and the risk of explosion of the internal combustion engine
f)
Poisonous carbon monoxide is present in the engine exhaust. Remaining in a carbon monoxide
nvironment may lead to losing consciousness or even death.
g)
Protect the engine from heat, sparks and flame. Do not smoke in the vicinity of the chipper!
h)
Before refuelling the engine should be turned off and cooled down
i)
Warning! Risk of engine damage due to wrong fuel.
j)
Make sure that all users have read, understood and follow the manual.
k)
Misuse or careless use of the device may cause serious injuries.
l)
Before each cleaning, regulation, accessory change, or if the device is not in use, turn the engine
off and completely cool the device.
m) Do not touch moving parts or accessories unless the engine is turned off and left to cool.
n)
Stay away from moving and rotating parts as they may cause injury.
o)
Do not use the machine if all protective covers are not installed.
p)
Do not touch the silencer or other hot elements when the engine is hot it may cause serious burns.
q)
Make sure that fuel is stored only in certified containers (e.g. canister).
r)
Do not refuel near sparks, flames or lit cigarettes.
s)
Stop the engine before refuelling. Never refuel while the engine is running or is still hot. Otherwise,
spilled or evaporated fuel may catch fire from engine sparks or silencer heat.
t)
Do not overfill fuel tank and avoid spilling fuel while refuelling. Spilled fuel or fuel fumes may catch
fire. If fuel has been spilled, make sure that the area is dry before starting the engine.
u)
After refuelling, make sure that the fuel tank cap is properly screwed on.
v)
Do not operate the engine or refuel in enclosed areas without appropriate ventilation.
w)
Avoid operating the machine in enclosed spaces, tunnels or other poorly ventilated places as the
exhaust fumes contain lethal/harmful fumes and gases. If operating the machine in such conditions
is unavoidable, provide adequate exhaust extraction.
x)
To transport: Stop the engine. Close and secure the fuel tank cap. Switch the fuel valve to the "OFF-
O" position. Drain the fuel tank before long-distance transportation or on bumpy roads.
y)
Keep flammable materials (petrol, matches, straw, etc.) away from the exhaust.
2.3.
Safety in the workplace
a)
Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to
accidents. Try to think ahead, observe what is going on and use common sense when working with
the device.
b)
Do not use the device in a potentially explosive environment, for example in the presence of
flammable liquids, gases or dust. The device generates sparks which may ignite dust or fumes.
c)
If you discover damage or irregular operation, immediately switch the device off and report it to a
supervisor without delay.
d)
Only the manufacturer's service point may repair the device. Do not attempt any repairs
independently!
EN
Publicidad
