Publicidad
Idiomas disponibles
Idiomas disponibles
LED Indications
INDICATION
USER ACTION
Unit ON
Press the
power ON/OFF button
Unit OFF
Press the
power ON/OFF button
Plug tool into computer
via USB‑C
Full Charge
Medium
Charge
Cylinder
Attempt a knockout punch
Bottoms Out
Recommended
Service
Temperature
Out of Range
LEDs
Both LEDs (
16
,
15
) and the power ON/OFF button
11
one second.
Both LEDs (
16
,
15
) and the power ON/OFF button
11
five seconds.
Both LEDs (
16
,
15
) illuminate in blue continuously.
NOTE: Indication is permanent as soon as tool is plugged in via USB.
The power ON/OFF button
NOTE: Indication is permanent as soon as tool is switched ON.
The power ON/OFF button
NOTE: Indication is permanent as soon as tool is switched ON.
Cycle Complete
15
LED will flash yellow for five seconds and the tool will
turn off.
Maintenance LED
16
NOTE: Indication is permanent as soon as tool is switched ON. Tool will
continue to run.
Maintenance
16
and Cycle Complete
red continuously.
NOTE: Indication is permanent as soon as tool is switched ON.
LEDs will turn off when an acceptable operation temperature is reached.
11
11
11
illuminates in green continuously.
11
blinks in green continuously.
illuminates in yellow continuously.
15
LEDs illuminate in
EXAMPLE
light in green for
GREEN
blink in green for
GREEN
BLUE
GREEN
GREEN
YELLOW
YELLOW
RED
English
13
Publicidad
