Radiola RAMF4B Manual De Instrucciones página 19

Operation Guide
1. Make sure the switch is in the OFF
state, then insert the power cord plug
into the outlet of the unit.
2. Insert and connect the plugs
respective.
3. Cooling: Set the switch to the COLD
position. The green indicator will
indicate that the unit is in cooling mode.
4. Heating: Set the switch to the HOT
position. The red indicatorwill indicate
that the unit is in heating mode.
The temperature inside the refrigerator is determined by the number of timesthe door
is opened and closed and the number of items stored in the refrigerator.
CLEANING AND MAINTENANCE
1. Before cleaning and maintenance, the "Cold / Hot" switch must first be turned off
and then disconnected from the power source.
2. Wipe off dirt and dust on the surface of the body with a soft cloth. You can also
use a soft cloth dampened with lukewarm water to clean the inside of the device.
3. The body should not be rinsed with water, especially the body parts such as the
ventilation openings of the switch socket, otherwise it will damage the product and
cause the risk of electric shock.
4. Please contact our customer service if you encounter any problems during
use.
5. Wipe off dirt and dust on the surface of the body with a soft cloth. You can also
use a soft cloth dampened with lukewarm water to clean the inside of the device.
power cord
(car power cord)
AC power cord (household power cord)
EN-8
Connector DC
Plug Connector
Connect