Descargar Imprimir esta página

Moulinex EASY FRY & GRILL DIGITAL EZ506820 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
- Put the rest of the bowl in the dishwasher
- After washing and thoroughly drying the outer window, place it back on the appliance by
sliding it upwards into place.
4. Wipe the inside and outside of the appliance with a damp cloth. The appliance works by
producing hot air. Do not fill the bowl (A) with oil or frying fat.
PREPARING FOR USE
1. Place the appliance on a flat, stable, heat-resistant work surface away from water splashes.
2. Insert the grid at the bottom of the bowl, up to the stop.
3. Do not fill the bowl with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow and affects the
hot air frying result.
IMPORTANT: To prevent the appliance from overheating, do not place it in a corner or below a
wall cupboard. A gap of at least 15cm should be left around the appliance to allow air to circulate.
USING THE APPLIANCE
The appliance can cook a large range of recipes. Cooking times for the main types of food are
given in the section 'Cooking Guide'. Online recipes help you get to know the appliance.
1. Connect the power supply cord to an electrical socket.
2. Place the food in the bowl.
Note: Never fill the bowl beyond the MAX level mark or exceed the maximum amount
indicated in the table (see into section 'Cooking Guide'), as this could affect the quality
of the end result.
3. Slide the bowl back into the appliance.
4. To begin cooking, you can select between the automatic cooking mode and the manual
settings.
a. If choosing automatic cooking mode:
• Select the desired cooking mode by pressing the icon corresponding on the touchscreen
panel (these modes are described in detail in the "Cooking guide" section).
• Confirm the cooking mode by pressing the
• Cooking starts. The selected temperature and remaining cooking time will alternate on
the on-screen display.
button. This will launch the cooking process.
4
b. If choosing manual settings:
• Adjust the temperature
with the
thermostat varies from 80-200°C.
• Then set the desired cooking time
set for between 1 and 60 minutes.
• Press the Start button to begin cooking with the selected temperature and time settings.
Cooking starts. The selected temperature and remaining cooking time will alternate on
the screen display.
5. Excess oil from the food is collected in the bottom of the bowl.
6. Some food will require shaking halfway through the cooking time (see section 'Cooking
Guide'). To shake the food, pull the bowl out of the appliance by the handle and shake it. Then
slide the bowl back into the appliance, the appliance restarts automatically.
7. When you hear the timer sound, the cooking time set has finished. Pull the bowl out of the
appliance and place it on a heat-resistant surface.
8. Check if the food is ready.
If the food is not ready yet, simply slide the bowl back into the appliance and set the timer
for a few extra minutes.
9. When the food is cooked, take out the bowl. To remove food, use a pair of tongs to lift the
food out of the bowl.
Caution: The bowl should never be turn up side down with the grid.
Caution: After hot air frying, the bowl, the grid and the food are very hot. Do not touch
the bowl during use and for some time after use, as it gets very hot. Only hold the bowl
by the handle.
Depending on the type of food cooked in the appliance, be careful as steam may escape
from the bowl.
10. When a batch of food is ready, the appliance is instantly ready for preparing another batch of food.
USING THE GRILL PLATE
1. Place the grill grid in the bowl of the appliance.
2. Press
, then press
on the screen to select the Grill mode.
3. Start the Grill mode by pressing
. Do not place any food in the basket. This will launch the
preheating phase (timing :15 minutes).
4. When you hear the timer sound, the preheating phase has finished and the temperature
has reached 200°C.
5. Do not take the bowl out during the pre-heating phase otherwise the timer will revert back
to 0 and the timer will start again.
6. The product goes into keep warm mode at 200°C for 10 minutes.
7. Take the bowl out the appliance and place it on a heat-resistant surface.
Caution : the bowl and the grill grid are very hot. Use a pair of tongs to place the food on
the grill plate.
8. Wait until the preheating phase has completed then place the food on the grill plate and
put back the bowl into the appliance.
and
buttons on the digital screen. The
by pressing
and
buttons. The timer can be
5
en

Publicidad

loading