Beurer IH 57 Instrucciones De Uso página 40

must be adhered to. Please note: For treatment, only use the medications indicated by your doctor
according to the particular diagnosis.
• The device is not a substitute for medical consultation and treatment. Always consult your doctor
first in the event of pain or illness.
• If you have health concerns of any kind, consult your GP!
• If the liquid you wish to use is not compatible with steel, PP, PC, silicone and PVC, do not use this li-
quid with our nebuliser. If the information provided with the liquid does not indicate whether the liquid
is compatible with these materials, please contact the liquid manufacturer. Examples of compatible
liquids include salbutamol solution and sodium chloride solution.
• Please note the general hygiene measures when using the nebuliser.
• Before use, ensure that there is no visible damage to the device or components. If you have any
doubts, do not use the device and contact your retailer or the specified Customer Services address.
• Changes to the device and the components are not permitted.
• Do not use any additional parts that are not recommended by the manufacturer.
• The nebuliser may only be operated with compatible Beurer atomisers and with the appropriate
Beurer components. The use of atomisers and components made by other companies may result in
less efficient treatment and could damage the device.
• Keep the device away from your eyes when it is in use, as the mist of medication could be harmful.
• Never use the device near flammable gases, oxygen or nitrogen oxide.
• Store the device and components out of the reach of children and pets.
• Keep packaging material away from children (risk of suffocation).
• The device must be switched off and the plug of the micro USB cable pulled out before every
cleaning and/or maintenance procedure.
• If the device was at the maximum storage temperature, a period of 4 hours is required before using it
in order for the device to cool down to a level where it is ready for the intended use. Likewise, if the
device was at the minimum storage temperature, a period of 4 hours is required before using it until
the device is ready for the intended use.
40