Matikgate ULTRA Serie Manual Usuario/Instalador página 66

EN
• Read the manual carefully, if in doubt, contact MATIKGATE AUTOMATION assistance.
• This manual contains instructions and safety warnings. Incorrect installation of the
automation can cause serious injuries.
• Keep this instruction manual for reference at for future maintenance work.
• MATIKGATE AUTOMATION is not responsible for the incorrect use of the product, or
for use other than that for which it was designed.
• MATIKGATE AUTOMATION is not responsible if the safety standards were not complied
with in the installation of the equipment to be automated, nor for any deformation that
may occur to it.
• This product was designed and produced strictly for professional use and indicated in
this manual. Any use other than that indicated may damage the product and/or cause
physical and material damage.
• Do not make changes to engine components and accessories.
• Do not keep the product close to heat sources or open flames, which could damage it,
corrupt it or create dangerous situations.
• Keep transmitters out of the reach of children to avoid accidents.
• The user must not, under any circumstances, try to repair or adjust the automation, he
must call a qualified technician.
• The installer must inform the customer of how to handle the product in an emergency
and provide its manual.
• The installer, before carrying out the assembly, must verify that the temperature range
indicated on the automation is suitable for the location of the installation.
• The installer, before carrying out the assembly, must check that the equipment to be
automated is in good mechanical condition, correctly balanced and opens and closes
properly.
• Automation for outside use.
• Preventive maintenance should be carried out every 6 months.
The installation of the automation must be carried out exclusively by a
qualified installer, respecting the standards, regulations and instructions
contained in this manual.
66
MATIKGATE AUTOMATION
SAFETY WARNINGS