Truma C30 Instrucciones De Funcionamiento página 11

Temperature setting
Temperature setting range –22 °C
to +10 °C (-8 °F to + 50 °F) in each
compartment
• Press the "<>" button and use the "+ / -"
buttons to increase or decrease the
temperature.
• Press the "<>" button again to change the
temperature setting in the second compart-
ments (only Dual zone models).
• Press the ">>" button for Turbo mode to
increase the speed of the compressor. This
setting can be used when you need to cool
products quicker.
Temperature unit setting
• Press the "<>" button two times to switch
between °F / °C for single zone models and
three times for dual zone models. °F or °C
will be shown at the display. Then press the
"+ / -" buttons to change.
• For the dual zone model, press "+" for
three seconds, and you can switch off the
cooling function of the compartment on
the left. Also press "-" for three seconds,
you can switch off the cooling function of
the compartment on the right. Press the
same button again for three seconds to
re-start refrigeration in the corresponding
compartment.
11