GE GFP1528 Instrucciones De Instalación página 2

PREPARE THE UNIT
3 INSTALL WASHER/DRYER
BRACKETS
Front Brackets
minimum height position.
washer or dryer as shown. Use the 2 holes
closest to the front and the 2 outermost holes
on the bracket. The bracket should not go
beyond the edge of the appliance.
Front Brackets
Rear Brackets
Rear Brackets
washer or dryer as shown above. Use the top
2 holes on the bottom of the appliance with the
tab on the bracket facing the outside.
2
Installation Instructions
ATTACH PEDESTAL/RISER TO UNIT
4 JOIN REAR BRACKETS
pedestal/riser to front brackets of washer or
dryer.
with front and rear brackets on pedestal/riser
and loosely fasten with screws. Make sure the
the pedestal/riser bracket and not the outside.
J
31-3000210 Rev. 3