Tineco FLOOR ONE S7 STEAM Serie Manual De Uso página 15

Cleaning Mode Selection
AUTO Mode
STEAM Mode
BOOST STEAM Mode
SUCTION Mode
Note:
Keep sharp objects away from the digital display screen to avoid scratches and scrapes.
• In AUTO mode, the iLoop sensor automatically detects how
dirty the floor is and applies the appropriate amount of clean
water and suction power accordingly.
• A red dirt monitoring loop indicates pollutant intensive area,
and a blue loop indicates less pollutants are detected. This
mode automatically applies the best cleaning solution.
• Press button to enter into STEAM mode. It will take 20-50s
to prepare steam. And there will be 6 holes to spray steaming.
Apply STEAM Mode when deep cleaning is needed.
• Press button to enter into BOOST STEAM mode. It will take
20-50s to prepare steam. And there will be 2 holes to spray
steaming. Apply BOOST STEAM mode when cleaning for
heavy-polluted area is needed.
• With wifi connected, open the APP and select the SUCTION
mode on APP, the appliance will enter into SUCTION mode.
• In SUCTION mode, the appliance will absorb water. We
recommend using this mode on wet surfaces.
13