Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
NOTE: The remote control's buttons function the same way as the
buttons on the humidifier's control panel except for the SLEEP
button.
Touch the ON / OFF button to turn on the humidifier.
1.
NOTE: The first time you turn on the humidifier, the default
high level mist will turn on and the current room's humidity
will display. The humidifier will remember the last used
settings when you turn it on again. However, if you unplug the
appliance, it will return to the default settings.
2. Touch the MIST button repeatedly to select one of the mist
settings:
Display Indicates
03
02
01
NOTE: When you are in setting mode the display flashes. To
confirm a setting, do not touch any buttons for a few seconds
and the display will stop flashing.
3. Touch the HUMIDITY button repeatedly to select the humidity
level from 40% to 80% in increments of 5%. The humidity
icon
to maintain the set humidity level. To turn off the humidity
function, touch the humidity button and select --.
4. Touch the ELECTROLYSIS button to turn on the electrolysis
function. The electrolysis icon
function will turn on for 5 minutes every hour until the function
is turned off. Touch the ELECTROLYSIS button to turn it off.
5. To set the humidifier to turn off in 1 to 8 hours, touch the TIMER
button repeatedly to select:
0H, 1H, 2H, 3H, 4H, 5H, 6H, 7H or 8H. The timer icon
displays and the screen alternately shows the hours remaining
EN
and the current humidity. To turn off timer function, touch the
Timer button and select 0H.
16
HOW TO USE
displays. The mist will turn on and off as necessary
Meaning
High level mist
Medium level mist
Low level mist
displays. The electrolysis
Publicidad
