Publicidad
Idiomas disponibles
Idiomas disponibles
Bitron
AquaMax Eco
Premium
120 W
Gravity
10000/15000/
20000
Premium
8000/10000/
12000/
16000/20000
Titanium 31000
Titanium 51000
Eco Expert
21000/26000/
36000/44000
180 W
Gravity
10000/15000/
20000
Premium
10000/12000/
16000/20000
Titanium 31000
Titanium 51000
Expert
21000/26000/
36000/44000
Fitting the UVC clarifier
How to proceed:
G
1. Open the hose clip of pipe collar DN 110 and push the pipe collar onto the outlet of the UVC
clarifier.
2. Position the UVC clarifier in the container and connect the outlet with the outlet of the con-
tainer using the pipe collar. Tighten the pipe collar.
3. Use fastening brackets to fasten the UVC clarifier on the container.
– The fastening brackets are fastened on the UVC clarifier and on the container wall.
4. Connect the outlet of the pump with the inlet of the UVC clarifier.
– Assembly material: (→ Combinations of UVC clarifier / filter pump)
5. Attach the switch box on the screws on the outer container wall. (→ Installing the switch box)
38
Assembly ma-
Installation diagram, see page 14
terial
OASE accesso-
ries, art. no.
Note
73752, 73757,
d
73758
73536, 73750,
e Use the pump without filter shells but with the
73752, 73757
pump holder EC2 installed
48597, 2× 73750,
f
73753
2× 73750, 73658,
g
73754
73536,
h
1×/2× 73750,
73752,
1×/2× 73757
73752, 73757,
i
73758
73536, 73750,
j Use the pump without filter shells but with the
73752, 73757
pump holder EC2 installed
48597, 2× 73750,
k
73753
73658, 2× 73750,
l
73754
73536,
m
1×/2× 73750,
73752,
1×/2× 73757
Publicidad
