PRIXTON TWS160S Manual De Instrucciones página 4

EN
Wireless Pairing Instructions
1. Power On ： Take out from Charging Case, Automatic power on Or Press the touch point
for 3 seconds to hand power on You can sellect "TWS160S" from Cell bluetooth list and
connect
2. Power Off ： Put back to Charging Case, Automatic power off Or press the touch point for
3seconds to hand power off
Functions
1. Play/Pause/Answer Call ： Short press any earbuds' button
2. Reject Call : Long press any earbud button for 2 seconds
3.Next Song ： Press right earbud for 2 times
4.Previous Song: Press right earbud for 3 times
5.Increase the volume: Press left earbud for 2 times 6.Decrease the volume: Press left
earbud for 3 times 7.Voice Assistant: Long press any earbuds for 2 seconds
Indicate light
For earbuds:
Connecting : Red and blue light flashing
Connected: light turn off
Charging : Red light
Fully charged: light turn off
For Charging case:
Charging: blue light
Fully charged: Four blue indicator lighting
Technical details
Model number : TWS160S
Wireless Support Protocol :A2DP AVRCP V1.5/ HFP V1.6/ HSP V1.2
Wireless version ： Jelly Bluetooth 5.0
Frequency ： 2.4 GHz
Operating distance ： up to 10 meters Driver unit ： 8mm
Sensitivity ： 105 dB SPL at 1kHz Impedance ： 32 Ω
Frequency response ： 20~20,000Hz Battery: 3.7V 45 mAh
Charge Power:5V/120mA
Battery capacity ： each earbuds 40 mAh Charging Box Capacity ： 800 mAh Charging Time
(h) ： Less than 1 hours Taking Time ： 4 hours
Music Time ： 4 hours Standby Time (h) ： 120 hrs Weight : 90 gram
When the Earbuds can not automatic connect to each other. Double press any earbud,
the twins will automatic paring each other