Craftsman 247.37126 Manual Del Operador página 11

.
Followthe stepsbelowto completehandleassembly:
A. Pull upwardon the handle untilholesin lowerhandle (shown
in Figure3 deck cutaway)line up with holesin handle
bracket.See Figure4.
NOTE:Whenpullingupwardon handle,makesureto not pull handle
all the way out.
B. Insertthe T-boltsremovedin stepearlier throughthe handle
bracketsand lowerhandleand tightensecurelyto securethe
handlein place.See Figure4.
C. Reattachwing nutsand carriagebolts removedearlierinto
lowerholesof handleas shownin Figure5.
4. The ropeguide is attachedto the right sideof the upper handle.
Loosenthe wingknobwhich securesthe rope guide.Referto
Figure6.
A. Holdblade controlagainstupperhandle.
B. Slowlypull starterrope handlefrom engineand slip starter
rope intothe rope guide.See Figure6.
C. Tightenropeguide wing knob.
D. Use cableties to secureblade controlcableto lowerhandle.
Attaching the Grass Catcher
1. Followstepsbelowto assemblethe grass catcher.Makecertain
bag is turnedrightside out beforeassembling(warninglabel will
be on theoutside).
A. Placebag overframeso that its blackplasticside is at the
bottom.
B. Slip plasticchannelof grass bag overhookson the frame.
See Figure7.
2. Followstepsbelowto attachgrass catcher:
A. Lift reardischargedoor.See Figure8.
Figure4
f
Figure5
Figure7
11
Figure6
,J