HAEGER Venus 600 Instrucciones De Uso página 7

Care and Maintenance
Emptying the dust container
The dust container is totally visible and therefore when it reaches the first line of the plastic
filter holes, it needs to be cleaned.
1. Turn the vacuum cleaner off by pressing the "on/off" button to stop the motor.
2. Unplug the vacuum cleaner from the mains power supply.
3. Remove the dust container by pressing the dust container release button and remove
it from the main body. (1)
4. Turn the plastic filter and take it out and then take out the HEPA filter and empty the
dirt inside. Shake the dust container gently to remove any remaining dust. (2)(3)
5. Clean the filter in cold water and allow it to dry completely for at least 6 hours in
direct sunlight. (4)
6. Put the filter back to the dust container and put the dust container into the main
body until it locks back into it position.
– Note: Do not clean the filter using detergent.
– Note: Do not use external heat sources such as a radiator to dry the filter.
– Ensure always that the dust container, filter and cyclone part are kept clean and
regularly maintained to prolong the life of the vacuum cleaner.
– Do not use the vacuum cleaner to pick up flammable liquids, matches, cigarette ends,
hot ashes or any hot burning or smoking objects.
English - 5