HAEGER Venus 600 Instrucciones De Uso página 8

– Do not use the vacuum cleaner to pick up water or any other liquid, as this poses risk
of an electric shock.
– Do not wash the appliance or its parts in the dishwasher.
Warning:
container not in position.
Warning: This product is fitted with a thermal cut-out, which will activate if the
motor overheats due to blocked air inlets. If the appliance cuts out, allow it to
cool for 1 hour, then empty the dust container and clean all of the filters.
STORAGE: Before storing the vacuum cleaner on wall mount accessory, ensure that it is
clean and all of the parts are dried fully.
Wind outlet filter (Motor filter) - it is advisable to be washed every week and changed at
least once 3 years. It was fixed at the back of machine, only turn the cover and then take
it out for washing or replacing.
Troubleshooting
1. Low suction when received new product.
Solution: Please check if all accessories are correct assembled and the bottom cover
was closed and locked.
2. Low suction after using few minutes.
Solution: Please check if there is big object block in the brush, tube or dust container,
it will be returned high suction power after removed.
3. Power cut off automatically after using a while.
Solution: The vacuum cleaner was equipped with motor thermostat (motor protector),
when dust is full or the appliance is long time using (more than 30mins), the motor
overheats very quickly, the power is cut-off automatically to protect appliance from
burning. Please unplug the device, empty the dust and clean the filter and wait motor
cool down (at least 30~60 minutes) before using again. If the vacuum cleaner does not
start again seek authorized technical assistance.
4. Low suction after using for some period.
Solution: please unplug the machine, empty the dust, disassembled the plastic/HEPA
filter and washing in water, the filters must be dried fully (or using cool wind by hair
dryer to dry) and then fixed back.
Do not use the Vacuum cleaner without the removable filter or dust
English - 6