Publicidad
Idiomas disponibles
Idiomas disponibles
C. Remote Mode (only supports operation within the Aiper App)
You can use the Remote Mode in the Aiper App to manually pilot
the device to move forward, backward, left, and right. If, in
Remote Mode, the device idles for three minutes, it will revert to
its previous mode.
D. Intermittent Mode
When the battery level is low, the LED Indicator will turn yellow.
The device will operate intermittently and continue working once
the battery level recovers.
•
Important Information About Intermittent Mode: If sunlight is
weak and the solar charging rate falls below the device's power
usage rate, it will automatically shut down due to insu cient
power. However, there's no need for manual intervention.
The device will recharge itself using the solar panel once the sun
is out again the next day and will resume operation automatically.
E. Detect Water Temperature (only available in the Aiper App)
When the device is connected to your smart device, users mayaccess
their pools water temperature within theApp.
F. Restore Factory Settings
To restore factory settings, press and hold the Power button for 10
seconds. This action will clear all data from the device, including
network configurations and cleaning records.
16
Publicidad
