DETACHING AND
ATTACHING THE FRONT
PANEL
Attaching the front panel
You can detach the front panel from the unit and
carry it with you when you leave your car
unattended.
When you carry the front panel out of your car,
use the supplied carrying case.
Before detaching the front panel, remove the
cassette to prevent possible damage to the unit.
1 Press PWR to turn the unit off.
2
While supporting the front panel with
one hand, press 1, to release one side
of the panel. Care must be taken not to
drop the panel. It may suddenly eject at
this point.
Security Lamp
When the front panel is detached, you can find an
LEED lamp on the front side of the unit. This lamp
is designed to deter theft, and continues to flash
when the front panel is detached. This unit is not
equipped with any other security systems such
as a security alarm, so there are limitations to its
effectiveness.
3
When the front panel is lifted from the
unit, remove it by pulling it away from
the unit.
Do NOT touch the connector on the reverse
contaminate the connector and cause a poor
connection resulting in a malfunction.
ENGLISH
4