Publicidad
1
Insert the cam lock (B) into the panel No. 2 by aligning the arrow on the cam lock
toward the cam bolt, then turn the cam lock (B) right 180° to lock the cam bolt (A).
For the upper holes, connect the panel (1) and (2) along the dotted line using wood
plugs (F), and for the lower holes, connect with cam bolt (A).
2
Slide in the No.3 panel along the side groove.
3
Insert the cam lock (B) into the panel No. 2, then turn the cam lock as in step 1.
4
Insert the nut (D) into the No.4 panel and keep the groove flat. For the upper
holes of No.4 panel, connect with wood plugs(F), and for the lower holes, connect
with screws(C).
04
Publicidad
