EINHELL GOVECS Elmoto Kick Manual De Usuario página 7

3. Assembly and Set up
1. Open the package
and read the manual
carefully before
assembly.
After assembly, please dispose the packaging in accordance with your local recycling and disposal regulations.
ASSEMBLY AND SET UP
2. Unlock the hook and
lift the steering column
towards a near-vertical
position.
ATTENTION, SAFETY INFORMATION!
Please check the tight fit of these
four screws on a regular basis!
3. Ensure that the folding
system and release
lever are locked
securely. (The steering
column cannot be
flipped back down if
correctly locked.)
4. Tighten the 4 screws on
the handlebars and check
that the handlebar is at
right angles to the driving
direction (alignment of the
wheel). If this is not the
case, readjust the steering
rod as described on page 19.
EN
7