EINHELL GOVECS Elmoto Kick Manual De Usuario página 8

4. Remote Control
Note:
All three buttons only work when the scooter is static. The
remote control contains the button cell CR2032 3V 210mAh.
8
REMOTE CONTROL
Power Off
Power On / Unlock
Lock
"Power On / Unlock" Button:
Press this button to switch on the scooter system. Front and
rear lights will be turned on. The scooter will be ready for
riding after a beep sound. (Note: Without any interaction, the
scooter will be set into a locked mode automatically after
5 minutes.)
"Power Off" Button:
Press until you hear a beep sound to switch off the scooter
system.
"Lock" Button:
Press until you hear a beep sound to lock the scooter. The
display only shows the lock icon, light icon and SOC (state
of battery charge). The scooter stays in locked mode until
the Unlock Button is pressed or the batteries are completely
discharged. When the scooter is set into lock mode, the anti-
theft function will be activated. If anyone tries to move the
scooter motor, a continuous beep alarm will be generated
while the front and rear lights will be blinking. The motor will
generate resistance power against moving until the motor
stops turning. Please note that the scooter uses electricity in
this mode. In particular, the alarm sound and the locking of
the rear wheel lead to increased power consumption and can
therefore reduce the remaining range.