nedis CCHAQM15W110BK Guia De Inicio Rapido página 6

Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep the packaging and this document
for future reference.
• Only use the product as described in this document.
• Do not open the product, there are no user serviceable parts inside.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water or moisture.
• Only power the product with the voltage corresponding to the markings on
the product.
• Only use the provided USB-C charging cable.
• Disconnect the product before cleaning.
• Do not use aggressive chemical cleaning agents such as ammonia, acid or
acetone when cleaning the product.
Mounting the product (image B, C & D)
1. Turn the adjustment ring A
2. Click the ball head A
3. Turn the adjustment ring A
Air vent clip (image C):
1. Open the support anchor A
2. Open the clip adjustment ring A
vent clip A
8
3. Place the air vent clip A
4. Close the clip adjustment ring A
Suction mount (image D):
1. Pull up the locking tab A
2. Slightly moisten the suction cup A
3. Place the suction mount A
4. Push the locking tab A
3 counterclockwise.
into the opening of the adjustment ring A
6
clockwise to fasten the ball head A
3
9 .
opens.
on the desired air vent.
8
r .
e on a desired place on the windshield.
to secure it to the windshield.
r
by turning it counterclockwise. The air
7
7 by turning it clockwise.
.
t
6
.
3
6 .