Publicidad
Idiomas disponibles
Idiomas disponibles
VERY IMPORTANT:
NEVER LEAVE THE MIXER OPERATING MORE THAN 2 MINUTES CONTINUOUSLY.
THE MIXER MUST REST AND LEAVE THE ENGINE COOLING EVERY 2 MINUTES OF USE.
FOR EVERY 2 MINUTES OF USE YOU SHOULD LET THE ENGINE COOL 15 MINUTES.
IF YOU DO NOT FOLLOW THESE INDICATIONS AND THE MOTOR BURNS, YOU WILL NOT HAVE THE
RIGHT TO WARRANTY.
THE MIXER WILL BE FREE OF WARRANTY AND WILL HAVE TO PAY THE REPAIR.
PARTS OF THE APPLIANCE.
PARTS OF THE APPLIANCE
ASSEMBLY OF THE JUG
1. Put the blade inside the threaded base, then put the gasket.
2. Assemble the blade assembly to the glass carafe and turn it clockwise until it
that snaps into place.
3. Mount the measuring cup on the lid.
4. Put the sealing gasket on the lid.
5. Position lid on carafe and press down.
INSERTING THE JUG
1. Make sure the mixer is turned off (speed selector in "0" position).
2. Place the jar assembly on the motor base and gradually press down until it fits firmly.
1. Measuring cup.
2. Lid.
3. Cover gasket.
4. 1500ml glass jug.
5. Jar base gasket.
6. Blades.
7. Screw-in jug base.
8. Jug assembly.
9. Operation selector.
10. Engine base.
Publicidad
