Astralpool EVOTOP INVERBOOST 05 Manual Del Usuario página 12

Thank you for using EVOTOP INVERBOOST swimming pool heat pump for your pool heating, it will heat your
pool water and keep the constant temperature when the air ambient temperature is at -7 to 43℃
ATTENTION: This manual includes all the necessary information with the use and the
installation of your heat pump.
* The installer must read the manual and attentively follow the instructions in implementation and
maintenance.
* The installer is responsible for the installation of the product and should follow all the instructions of the
manufacturer and the regulations in application. Incorrect installation against the manual implies the
exclusion of the entire guarantee.
* The manufacturer declines any responsibility for the damage caused with the people, objects and of the
errors due to the installation that disobey the manual guideline. Any use that is without conformity at the
origin of its manufacturing will be regarded as dangerous.
WARNING:
*Please always empty the water in heat pump during winter time or when the ambient temperature drops below 0℃,
or else the Titanium exchanger will be damaged because of being frozen, in such case, your warranty will be lost.
*Please always cut the power supply if you want to open the cabinet to reach inside the heat pump, because there is
high voltage electricity inside.
*Please well keep the display controller in a dry area, or well close the insulation cover to protect the display
controller from being damaged by humidity.
1. Description
2. Transport information
3. Specifications
4. Accessories and options
5. Location and connection
6. Electrical Wiring
7. Start-up of the Heat Pump
8. Troubleshooting
9. Exploded Diagram and Maintenance
INDEX INDEX
INDEX
- 8 -