Astralpool EVOTOP INVERBOOST 05 Manual Del Usuario página 33

7. Display Controller Operation
7.1. Guide for operation
When the heat pump connects to the power, the LED display shows a code for 3 seconds which indicates the heat
pump model.
7.2 The keys and their operations
7.2.1 button
Press
to start the heat pump unit, the LED display shows the desired water temperature for 5 seconds, then
shows the inlet water temperature and the operation mode.
Press
to stop the heat pump unit and show "OFF"
Notice : During the parameter checking and setting, press the
Press
again to turn on/off the machine.
7.2.2 button
It will be under function with another button.
7.2.3 and
Clock/unclock the display:
Hold and
Water temperature setting:
Press or
7. 7. 7. Start-up Start-up Start-up
button
for 5 seconds to lock/Unlock the display.
to set the water temperature directly.
of of of the the the Heat Heat Heat Pump Pump Pump
to quick-exit and save the current setting .
- 29 -