Glacier bay HDQFP1B4202CP Instrucciones De Instalación página 6

Installation (continued)
5
Securing the faucet body
□
Loosen the set screw at the bottom of the faucet
body (B).
□
Align the set screw hole at the bottom of the
faucet to the recess on the top mounting fixture
(E) and then set the faucet body (B) to the top
mounting fixture (E). Ensure there are no gaps
between the faucet body (B) and the mounting
surface.
□
Tighten the set screw with the hex wrench (F).
B
F
6
Connecting supply lines
CAUTION: Ensure the supply lines (J) do not kink, twist
or bend into a "V" or "L" shape during installation. Do not
use if there are visible signs of damage.
□
Use two adjustable wrenches to connect and
tighten the supply lines (J) to the supply valves.
□
Connect the red supply line to the hot water
supply valve.
□
Connect the blue supply line to the cold water
supply valve.
RED
LINE
B
E
HOT
6
1
1
COLD
BLUE
LINE
2