Publicidad
Assembly Instructions
Williams-Sonoma Inc.
Instructions d'assemblage
Instrucciones de Ensamblaje
Pottery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham – GreenRow
1-March-2024
27/38
Troubleshooting:
WARNING: For your own safety turn off power at fuse box or circuital breaker before trouble shooting your fan.
Problem: Fan fails to operate.
Solutions:
1. Check wall switch to fan.
2. Verify that reverse switch is set completely in either direction.
3. Verify that receiver is wired properly.
4. Check to be sure fan is wired properly.
5. Verify that wall control is wired properly.
6. Check that red light on remote control transmitter turns on when a button is pressed indicating that the battery is good.
7. Pairing process between fan and remote may not have been successful. Turn off power, Follow "Normal Fan and
Remote Pairing process" and pairing again.
Problem: Light kit not lighting.
Solutions:
1. Check wall switch to fan.
2. Check that wires of light kit is installed correctly.
3. Check that wires in canopy are wired properly.
4. Pairing process between fan and remote may not have been successful. Turn off power, Follow "Normal Fan and
Remote Pairing process" and pairing again.
Problem: Fan and light fail to operate with remote control.
Solutions:
1. Check battery power to remote control.
2. Pairing process between fan and remote may not have been successful. Turn off power, Follow "Normal Fan and
Remote Pairing process" and pairing again.
Problem: Fan wobbles.
Solutions:
1. Interchanging position of fan blades can redistribute the weight and result in a smoother operation.
2. Check to be sure set screw(s) on motor housing yoke is (are) tightened securely.
3. Check to be sure set screw on hanging ball is tightened securely.
Problem: Reverse function does not work.
Solutions:
1. The Reverse function needs to wait for the fan to stop completely before operation.
FCF
Publicidad
