5 Unit installation
5.2
Interchangebility
The direction of the product must be changed on the ground.
Remove the cover sheet metal on the side plate of the unit.
Installation and operation manual
8
NOTICE
Always use upper air purges.
5.3
Mounting the unit
5.3.1
To install the suspension bolts
Use the pattern to determine the suspension bolt positions (upper
part of the packing). Suspension bolt positions are indicated on the
paper pattern. Holes can be drilled by putting the paper pattern on
the ceiling.
a
Paper pattern for installation. (upper part of the packing)
a
FWE-F
Fan coil units
3P756931-1 – 2023.11