Blackview AirBuds 6 Manual página 5

phone or try another place.
Reason: 3. The power of bluetooth headset is
insufficient. Please charge the headset as soon as
possible.
Solution: Please charge the headset as soon as
possible.
(6) There is no sound in the headset during voice
call, and the sound comes out of the mobile phone.
Reason: The headset is operated during a voice call or
call. Double click the headset.
Solution: Turn off the bluetooth of the mobile phone
and then turn it on, or put the headset into the box,
close the cover, turn off the headset and then open the
cover; The headset does not support the connection or
hanging up of voice calls. If there is a voice call, please
connect or hang up on the mobile phone.
(Note: at present,the headset only supports incoming
calls from GSM cards, not app network calls.)
(7) After the headset is put into the box and the
cover is closed, the headset is not disconnected.
Reason: 1. The charging box is completely dead;
Solution: Charge the charging box;
Reason: 2. The headset is not put into the box
properly, and the communication between the headset
and the base is abnormal.
Solution: Reopen the charging box, take out the
headset from the box, and then put it into the box.
When the headset is put into the box, the green light on
the charging box will light once and close the cover.
Reason: 3. The charging box is damaged.
Solution: Replace the charging box.
7
Attention
- Please do not disassemble this product by yourself.
- Please use standard charging cable and adapter to
avoid damage and accidents.
- Please aviod using corrosive cleaning detergent to
clean this product.
- Please avoid product usage in the rain and keep away
from heating or fire.
Maintenance
Please follow the following suggestions to prolong
product working life.
- Keep product dry and don't put in damp places in case
of affecting internal circuit.
- Aviod product usage during intense sporting or on
sweating occasions in case sweat infiltrate into
product and cause damages.
- Keep off sunlight or high temperature in case of
shortening working life of electric parts battery
damage, plastic parts deformation.
- Keep off intense vibration and impact from hard
material in case of internal circuit damages.
8