Nolangroup N-Com R Serie Seguridad E Instrucciones página 37

Position the left and right speakers in the respective housing obtained in the polystyrene cheek
•
padding. If necessary, rotate the speakers slightly in their housing.
Reassemble the padding.
•
3.4. Adjusting the microphone
The B101 system makes it possible to adjust the position of the microphone in order to facilitate its
positioning in the different helmet models. Proceed as follows:
Open the clip positioned on the microphone boom, operating as indicated in Fig. 23.
•
Adjust the microphone (Fig. 24).
•
Close the clip (Fig. 25).
•
Fig. 23
To ensure good voice transmission quality, it is recommended to position the microphone sponge at
the side of your mouth.
Fig. 24 Fig. 25
13