Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL THE UNDER SINK
MOUNTING HARDWARE (CONT.)
the support flange.
IF CONNECTING TO A DISHWASHER
If you are connecting to a dishwasher, complete this step.
If a dishwasher is not to be connected, skip to ATTACH
THE DISCHARGE ELBOW section and continue.
•
or wooden dowel), to knock out the entire dishwasher
instrument. When knockout plug falls into disposer, you
may remove it or simply grind it up when the disposer
but may take some time to grind, over the course of
several uses.
use a screwdriver or
sharp instrument.)
49-4000291 Rev 0
Installation Instructions
Screws (3)
ATTACH THE DISCHARGE ELBOW
• Slide the discharge flange and then the discharge gasket
onto the discharge elbow. Insert the discharge elbow and
gasket into the disposer discharge outlet and attach the
flange assembly to the disposer with the two screws.
NOTE: Some installations may require a straight pipe
or flexible drain pipe connection. Consult a licensed
plumber as needed.
Gasket
Screws
Elbow
9
Publicidad
