Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Step 1: Spread the tent out flat, floor
side down. Assemble the three shorter
fiberglass poles and insert into the
sleeves on the top of the tent. (pic
1,3) Insert the top of the pole into the
star shaped hub on the top of the
tent. (pic 2)
Step 2: Insert poles ends into the
corresponding pin rings. (pic 4,5) .
Step 3: Assemble the two longest
fiberglass poles and insert into the two
side sleeves. Insert poles ends into the
corresponding pin rings. (pic 7,8) Clip
the plastic hooks sewn to the tent to
the fiberglass poles. (pic 6)
Step 4: Fix stakes into the rings on the
corners of the tent to secure it to the
ground. (pic 7,8,9)
Step 5: Assemble the
shortest fiberglass pole and
insert through the front
sleeve. (pic 10) Insert
poles ends into the
corresponding pin rings.
(pic 11,12)
pic
1
pic
4
pic
7
pic
10
06
pic
2
pic
3
pic
5
pic
6
pic
8
pic
9
pic
11
pic
12
Publicidad
