FR-Tec GRAND CHELEM Guia Del Usuario página 32

GEAR SHIFT OPERATION
1. The gear shifter is a 2 in 1 version which includes the sequential gear shifter and the 6+1 H-shifter
(including 1,2,3,4,5,6 gear and reverse).
2. RJ11 6P4C plug on the gear shifter;
3. Use the RJ11 male to male connection cable to connect the shifter to the steering wheel base.
4. With 2 switches:
•Left switch "P" (handbrake) ON is "P" active, OFF is "P" released
•Right switch to change the sequential gear shifter to H mode and vice versa.
5. How to assemble base for sequential mode:
i. Remove the Allen key and
remove the cover
iv. Put on the sequential shifter
cover and fix the hexagon
socket screws.
30
ii. Loosen the screw and pull
the knob upwards
v. Put the knob back on and
screw it down
iii. Loosen the 4 bolts and
remove the H-shift cover
vi. Put the cover on and store the
Allen key at the bottom of the gear
shifter