Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL FUNCTIONS
open / close
rev-
professional
dual cd player
jog
12
13
1. OPEN/CLOSE button (Disc Tray Open/Close) –
This button is used to open and close the disc
transport tray door.
NOTE: When a disc is loaded, the tray will not
open unless the unit is in pause or cue mode.
2.
TRACK button – This button is used to
select your desired track. Tapping the button will skip
backward to the
this button will rapidly skip backward through the
tracks on your CD.
3. +10 TRACK SKIP button – This button allows
you to skip ahead by 10 tracks. Example: if you
are at Track #1, pressing this button will skip you
to Track #11, press the button again, it will skip to
Track #21. If there are not that many tracks, it will
go back to Track #1.
4.
TRACK button – This button is used to
select your desired track. Tapping the button will skip
forward to the next track, holding down this button
will rapidly skip forward through the tracks on your
CD.
5. LIQUID CRYSTAL DISPLAY (LCD) – This high
quality LCD Indicates all the functions (play, pause,
cue, etc..,), as they occur. This display is
viewable at several comfortable angles as
described on. The LCD icons will be described in
the next section.
6. PITCH SLIDER – This slider is used to adjust the
playback pitch percentage when the PITCH function
is activated. The slider is a set adjustment and
will remain set until the pitch slider is moved or the
PITCH function has been turned off. The maximum
pitch range of the slider is +/-16%. This adjustment
can be made with or without a CD in the drive.
5
3 4
2
8
9
1
disc 1
fwd+
relay
time
sgl
prog
track skip
loop
+10
pich bend
cue
shuttle
17
15
14
previous
track; holding down
6
8%, 12%, 16%
CDJ-6011
open / close
disc 2
rev-
fwd+
pitch
pitch control
jog
shuttle
16
19
The pitch adjustment will remain even if a disc has
been removed, and will reflect on any other disc
loaded into the unit. That is to say, if you set a
+2% pitch on one disc, remove that disc and
insert another, that disc will also have a +2% pitch.
The amount of pitch being applied will be
displayed in the LCD. Use this slider to match the
BPM's of this unit to that of another music source. By
changing the pitch of one disc with respect to the
other in this way, the beats can be matched.
8.
you to quickly scan backward through a track.
9.
SEARCH button – This search button allow
you to quickly scan forward through a track.
10. TIME button – The TIME button is used to
changed the displayed time values. Time can be
displayed as elapsed track time, remaining track
time, and total disc remaining time.
11. SGL/CTN button – This button allows the unit's
play
Continuous. In single mode the unit will play a
single track and return to cue mode. In
continuous mode the unit continues to play track
by track.
3
CONTROL UNIT
11
10
8%, 12%, 16%
time
sgl
prog
track skip
loop
pitch
+10
pich bend
cue
pitch control
18
20
SEARCH button – This search button allow
mode to change between Single and
Publicidad
