Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL FUNCTIONS
12. SHUTTLE WHEEL
Playback-mode:
Via the Shuttle-wheel, you can quickly scan
forwards and backwards. Turn the Shuttle-wheel
to the right in order to scan forwards and turn it to
the left in order to scan backwards. The further you
turn the Shuttle wheel the higher the scanning-
speed.
Pause-mode:
In the pause-mode, the current frame is repeated as
soon as you turn the Shuttle-wheel.
13. JOG WHEEL
Playback-mode:
Via the Jog-wheel, you can temporarily adjust the
playback-speed by +/- 16 %.
Pause-mode:
In the pause-mode, the current frame is repeated as
soon as you turn the Jog-wheel. Via the Jog- w
you can slowly search within a title forwards and
backwards. In this way, you can easily nd a
Cue-point for example. Turn the Jog- wheel to the
right in order to search forwards and turn it to the
left in order to search backwards. The faster you turn
the Jog- wheel the higher the searching-speed.
14. CUE button – Pressing the CUE button during
playback immediately pauses playback and
returns the track to the last set cue point. The red
CUE BUTTON LED will glow when the unit is in
cue mode The LED will also ash every time a
new CUE POINT is set. The CUE button can also
be held down to momentarily play the CD. When
you release the CUE button it instantly returns to
the last set CUE POINT.
15. PLAY/PAUSE button – Each press of the
PLAY/PAUSE BUTTON causes the operation to
change from play to pause or from pause to play.
While in play mode the play LED will glow, and
while in pause mode the play LED will ash.
16. PITCH button – This button is used to turn the
pitch function on and o . The pitch functions of the
PITCH SLIDER, PITCH BEND BUTTONS and
JOG WHEEL will not function without this function
being activated. The pitch slider and pitch bend
buttons have a maximum range of +/-16%. The "+"
and "-" pitch bend buttons have a maximum range
of 16%.
17. PITCH BEND BUTTONS
(-) PITCH BEND button – The (-) pitch bend
function creates a momentary "Slow Down" in the
CD's pitch speed (Beats per minute - BPM) when
the PITCH function is activated. This function allows
the beats between two CD's or any other music
source to match.
This is a momentary function. When the button is
depressed the pitch speed will automatically return
to PITCH SLIDER'S selected pitch. Holding down
this button will give a maximum of -16% pitch. Be
sure to remember that this function is a momentary
pitch adjustment, for a more precise adjustment
use the PITCH SLIDER to match the BPM's with
another playing music source.
(+) PITCH BEND button – The (+) pitch bend
function creates a momentary "BUMP" in the CD's
pitch speed (Beats per minute - BPM) when the
PITCH function is activated. This function allows
the beats between two CDs or any other music
source to match. This is a momentary function.
When the button is depressed the pitch speed will
automatically return to PITCH SLIDER'S selected
pitch. Holding down this button will give a
maximum of +16% pitch. Be sure to remember
that this function is a momentary pitch adjustment,
heel,
for a more precise adjustment use the PITCH
SLIDER to match the BPM's with another playing
music source.
18. LOOP button –
the loop start point, press the LOOP button
again to set the loop end point
19. CONTROL START socket – These sockets are to
connect to a mixer using a 3.5mm jack plug to give
remote start capability. When the switch contacts
are shorted the respective unit will play, and similarly
when the switch contacts are open the player will
be in pause mode.
20. CONTROL connector – Connect this connector to
the REMOTE connector on the main unit using
the included control cord.
4
CONTROL UNIT
Press the LOOP button to set
Publicidad
