Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL FUNCTIONS
1. TRACK INDICATOR – This 3-digit indicator details a
current track. The number displayed in the track
indicator is a direct reference to a track being
selected a track in play, pause, or cue mode.
2. TIME BAR INDICATOR - This bar visually details
the time defined in the TIME METER (M, S, &F)
As with the TIME METER, this bar is also
dependent on the selected time function TOTAL
REMAIN, REMAIN or ELAPSED. This bar will
begin to flash when 15 seconds of a track remain
and will begin to rapidly flash when three seconds
of a track remain. The flashing bar is a great
visual reminder a track is about to end. The
flashing bar will function regardless of which time
mode the unit is in.
3. MINUTES METER – This meter will display the
elapse, total, or remaining time in minutes. The
display time will be indirect reference to the
current time mode.
4. SECONDS METER – This meter will display the
elapse, total, or remaining time in seconds. The
display time will be indirect reference to the current
time mode.
5. FRAME METER – This meter will display the
elapse, total, or remaining time in frames. The
displayed frames will be indirect reference to the
current time mode.
2
3
1
4
5
6
7
6. SINGLE INDICATOR – This indicates the unit is
in single play mode, the unit will play a single and
return to CUE mode. If the single indicator is not
displayed, the unit is in continuous mode. In
continuous mode the drive will play through all the
tracks on the disc.
7. REMAIN INDICATOR – This indicator is in direct
reference to the TIME METER. When the REMAIN
indicator is displayed in the LCD, the time defined
will refer to a single track's remaining time. The time
mode is changed by tapping on TIME button.
8. TOTAL REMAIN INDICATOR – This indicator is in
direct reference to the TIME METER. When the
TOTAL REMAIN indicator is displayed in the LCD,
the time defined will refer to a disc's total remaining
time. The time mode is changed by tapping on
TIME button.
The unit will indicate the ELAPSED time when
neither the TOTAL REMAIN OR REMAIN
indicators are showing.
9. PITCH METER – This meter displays the pitch
percentage being applied to playback by the PITCH
SLIDER. If the meter read zero regardless of the
PITCH SLIDER'S position, the PITCH function is not
activated.
6
LCD DISPLAY
8
9
Publicidad
