Publicidad
Idiomas disponibles
Idiomas disponibles
Main Switch
When the switch is in the ON position, the machine is in the
stand-by mode ready for use.
Tracer point
The tracer point detects the bitting of the 'key sample', and it fol-
lows the profile of the original key to be copied.
• Stop nut for tracer horizontal movement (A)
• The tracer horizontal position can be adjusted by loosening
the locking nuts by means of the screw (D)
• Adjusting screw for tracer longitudinal movement (B)
• Stop nut for tracer longitudinal movement (C)
• The tracer longitudinal movement can be adjusted by re-
leasing the locking nut by means of the knob (B)
Adjusting screw for tracer horizontal movement (D)
This screw allows adjusting the horizontal movement of the
tracer.
D
A
A
Jaws
The machine is fitted with 2 jaw sets that shall be arranged ac-
cording to the type of key to be cut.
• Levers to clamp jaws (10)
These levers clamp jaws to lock processed keys in place.
• Gauging device (11)
Rod used to set key measurements for keys with stop.
Copyright by Keyline - Italy
MACHINE DESCRIPTION
11
Milling cutter
The milling cutter moves parallel to the tracer and performs the
B
cutting of the "blank" key (duplicate key).
Carriage handle
The carriage handle has a twofold function: it controls the verti-
cal movement of the carriage and it starts the machine automat-
ically.
C
'Start brush' push button
Push this button to start the brush.
Lever to control carriage horizontal movement
This lever controls the horizontal movement of the carriage.
Protective screen
The key cutting machine is equipped with a protective screen
that prevents operators from being hit by projected metal chips
during machining.
EASY
2.2.0
Technical data
TECHNICAL FEATURES
Power supply
230V 50Hz / 110V 60Hz
Movements/Axes
Jaws
Tracer
Motor
Asynchronous, one speed
Cutter
HSS 80x5x16 mm
Cutter Speed
Brush
Absorption
Dimensions
W: 370 mm; D: 370 mm; H: 240 mm
Weight
Working temperature
0°C ÷+ 40°C
Acoustic pressure level Lp (A)
dB(A)
2.3.0
Electric circuit
1. Fuse socket
2. Fuse
3. Main switch
4. Brush start switch
5. Microswitch
6. Motor
7.
Grounding
Man. cod. B410462FG
2 axes
2/4 faces
Hardened
700 rpm
Tynex
200 W
19 Kg
78.5
Keyline S.p.A.
5
Publicidad
