Create B-LIFE SMART BOTTLE Manual De Instrucciones página 7

1. LCD screen
2. Temperature
and battery
status display
3. Smart lid
4. Stainless steel
container
5. Rubber stand
Touch function
• The gray area outside the screen is the touch
area. If you click outside this area, the screen
won't work.
• When topuching the sensing area, the light belt
and the screen light up at the same time.
• The screen shows the current water tempera-
ture inside.
• When the light belt is green, yellow or red, it
means different things:
• GREEN: water temperature between 1 and 36 0C.
• YELLOW: water temperature between 37 and 60 0C.
• RED: water temperature above 61 0C.
Charging mode
waterproof ring
• Remove the lid and the silicone waterproof ring to
connect the charging interface to the charging port.
• Make sure to install the silicone waterproof ring
again after charging to avoid water leakage.
• After a full charge, the smart bottle can be nor-
mally used for about 30 days.
LIST OF PARTS
INSTRUCTIONS
Charging port
Silicone
Lid
1
2
3
4
5
USB charging
interface
ENGLISH 7