Publicidad
Idiomas disponibles
Idiomas disponibles
BLACKOUT BUDDY CO OWNER'S MANUAL
NOTE: See Section RECOGNIZING NUISANCE ALARMS,
for nuisance alarm situations.
2. Product Important Information
CAUTION! - This CO alarm was designed to detect
carbon monoxide from any source of combustion in a
residential environment. It is not designed for use in
recreational vehicle (RV) or boat.
CAUTION! - This CO alarm was designed for indoor use
only. Do not expose to rain or moisture. Do not knock or
drop the detector.
Do not open or tamper with the alarm as this could cause
malfunction.
CAUTION! - This CO alarm will not protect against the
risk of carbon monoxide poisoning when the battery has
drained.
CAUTION! - Installation of the alarm should not
be used as a substitute for proper installation, use
and maintenance of fuel burning appliances including
appropriate ventilation and exhaust systems.
CAUTION! This CO alarm should be installed by a
competent person.
CAUTION! This CO alarm is not intended to alert
hearing impaired individuals.
WARNING! - Do NOT try to repair the CO alarm, it has
the risk of electric shock or malfunction if the CO alarm is
tampered with.
WARNING! - Individuals with medical problems may
consider using warning devices which provide audible
and visual signals for carbon monoxide concentrations
under 30 ppm. This CO alarm has not been investigated for
carbon monoxide detection below 70 PPM.
WARNING! - THIS CO ALARM WILL ONLY INDICATE
THE PRESENCE OF CARBON MONOXIDE GAS AT THE
6
BLACKOUT BUDDY CO OWNER'S MANUAL
SENSOR. CARBON MONOXIDE GAS MIGHT BE PRESENT IN
OTHER AREAS.
WARNING! - THIS CO ALARM IS DESIGNED TO
PROTECT INDIVIDUALS FROM THE ACUTE EFFECTS OF
CARBON MONOXIDE EXPOSURE. IT WILL NOT FULLY
SAFEGUARD INDIVIDUALS WITH SPECIFIC MEDICAL
CONDITIONS. IF IN DOUBT CONSULT A MEDICAL
PRACTITIONER .
WARNING!- THIS CO ALARM IS INTENDED FOR USE
IN ORDINARY INDOOR RESIDENTIAL AREAS. IT IS NOT
DESIGNED TO MEASURE COMPLIANCE WITH COMMERCIAL
AND IN DUSTRIAL STANDARDS.
WARNING! - THIS CO ALARM IS DESIGNED TO
DETECT CARBON MONOXIDE GAS FROM ANY SOURCE OF
COMBUSTION. IT IS NOT DESIGNED TO DETECT SMOKE,
FIRE , OR ANY OTHER GASES.
1. The TEST/SILENCE button accurately tests the CO alarm
functions. Do not use any other test method. Test the CO
alarm weekly to ensure proper operation. Do not install
in non-residential buildings. And the CO alarm is not a
substitute for a complete alarm system.
2. If you're sure it isn't a real alarm warning, open windows
or fan the air around the CO alarm to silence it.
3. Observe and follow all local and national electrical and
building codes for installation.
4. This CO alarm is designed to be used inside a single
family only. In multifamily buildings, each individual living
unit should have its own CO alarm. Do not install in non-
residen
5. Install a CO alarm in every room and on every level of the
home. CO may not reach the CO alarm for many reasons.
For example, if a CO starts in a remote part of the home, on
another level, in a chimney, wall, roof, or on the other side
of a closed door, CO may not reach the device in time to
7
Publicidad
