Publicidad
Idiomas disponibles
Idiomas disponibles
BLACKOUT BUDDY CO OWNER'S MANUAL
REQUIRED TO MEET NFPA RECOMMENDATIONS
SUGGESTED AREAS FOR INSTALING ADDITIONAL
CO ALARMS
3.2 Installation instructions
CAUTION! -This CO alarm should be installed by a
competent person.
WARNING! - This CO alarm should be located in an
open and unobstructed area and shall not be located
behind furniture, drapes, or any other object where it
might not be seen or heard. The alarm shall be heard from
all sleeping areas.
WARNING! - Alarm users should add the phone
numbers of their emergency service providers and
qualified technicians on the two self-adhesive labels
provided by the alarm manufacturer. Users should place
one label next to the CO alarm and another near the
source of fresh air they plan to gather. When the alarm
indicates the presence of carbon monoxide, the user can
escape as planned.
When choosing your installation locations, make sure you
can hear the alarm from all sleeping areas. If you install
10
BLACKOUT BUDDY CO OWNER'S MANUAL
only one device in your home, install the CO alarm near
bedrooms, not in the basement or furnace room.
1. Place the batteries correctly in the battery
compartment and install the battery cover.
2. Test the CO alarm by using the TEST/SILENCE button.
Ensure the device sound is alarm pattern.
3. Choose a standard 120V unswitched outlet to plug
the CO alarm into.
4. Turn the plug of the product 90 degrees outward and
plug the CO alarm into the outlet.
5. Make sure the green light stays on.
As you install the CO alarm, it may sound for several
minutes, then stop and enter in normal operation mode.
If it always sounds, please call our agent.
4. Understanding your CO alarm
4.1 Product overview
6
1
2
3
4
1 LCD Display
2 TEST/SILENCE button
3 Sounder
4 Indicator GREEN=POWER
5
5 Flashlight switch
6 Flashlight
YELLOW=FAULT
RED=ALARM
11
Publicidad
