Check that the door is airtight at regular intervals (no air must be
allowed to get in between the door stop gasket and the burn pot's lower
gasket).
3.4 -
CLEANING THE GLASS
3.5 -
CLEANING THE FLUE (Fig. 32)
4 – ECOFIRE: MAINTENANCE
4.1 DESCRIPTION OF THE STOVE'S INTERNAL COMPONENTS
4.1.1 REACHING INTERNAL PARTS
4.1.2 AUGER MOTOR (L) (Fig. 35)
4.1.3 DRAUGHT FAN (B) (Fig. 34)
4.1.4 HOT-AIR BLOWER (C) (Fig. 34)
4.1.5 BLOWER THERMOSTATS
22
4.1.6 NORMALLY OPEN MINIMUM SMOKE TEMPERATURE
THERMOSTAT (F) (Fig. 34) - Set to 46° C
4.1.7 PRESSURE SWITCH (D) (Fig. 34)
stops
4.1.8 SAFETY THERMOSTAT WITH MANUAL RESET
rheats.
4.1.9 ROOM TEMPERATURE THERMOSTAT
4.1.10 DRAUGHT FAN CAPACITOR
4.1.11 ELECTRIC CIRCUIT BOARD
4.1.12 LIGHTING RESISTOR (Fig. 37)
Startup phase:
4.2
ADJUSTING PELLET FEEDING
the fire chamber ove-