Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
2 38-mm toasting slots
2.
Toasting level knob
3.
Crumb tray
4.
Stop button
5.
Reheat button
6.
Defrost button
7.
Toasting lever
NOTE
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the appliance
-
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
-
Before using the toaster for the first time, it is important to perform a toasting process
without bread. Do so 4 or 5 times. Push the toasting lever down until it latches into place.
When the toasting is finished, the toasting lever automatically springs up. The toaster is
-
now ready to be used.
Warning:
A slight odour and smoke might appear when using the appliance for the first time. This is due
to manufacturing material residues and does not affect the operation of the appliance.
3. OPERATION
1.
Insert the slice of bread into the slot.
2.
Use the toasting-level knob to select the desired toasting level. There are 6 different
levels, from 1 (the lowest toasting level) to 6 (the highest level).
34
TOAST&TASTE 800 VINTAGE LIGHT RED
Publicidad
