Bosch GOP 18V-34 Professional Manual Original página 21

Accessory
AIZ 32 BSPB/
AIZ 32 BSPIB
Starlock
32 × 50 mm bi-
metal plunge cut
saw blade for hard-
wood
AIZ 32 AT/
AIZ 32 AIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for metal
AIZ 32 APT/
AIZ 32 APIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for
multi-material
PAIZ 45 AT/
PAIZ 45 AIT
StarlockPlus
45 × 50 mm
carbide plunge cut
saw blade for metal
PAII 52 APT/
PAII 52 APIT
StarlockPlus
52 × 50 mm
carbide plunge cut
saw blade for
multi-material
AYZ 53 BPB
Starlock
53 × 40 mm
plunge cut saw
blade for multi-
material
AII 65 APB/
AII 65 APIB
Starlock
65 × 40 mm bi-
metal plunge cut
saw blade for wood
and metal
ACZ 85 EB/
ACZ 85 EIB
Starlock
85 mm diameter
bimetal segment
saw blade for wood
and metal
Bosch Power Tools
Material Application
Hardwood, laminated Splinter-free separation and plunge cuts in coated boards
boards or hardwood thanks to round sawing edge (Curved-Tec),
Japan toothing specially suited for hardwood;
Example: Installation of skylights, recess for plug sockets
Hard ferrous metals, ex- Sawing extremely abrasive materials or hard ferrous
tremely abrasive materi- metals; long service life thanks to BOSCH carbide techno-
als, fibreglass, plaster- logy;
board, cement-bonded Example: Cutting of kitchen front covers, simple sawing
fibreboards, hardened through hardened nails and stainless steel
nails and screws
Hard ferrous sheet metal, Splinter-free separating cuts and plunge cuts in sheet
epoxy, plasterboard, metal thanks to round sawing edge (Curved-Tec); long ser-
GFRP, CFRP, cement vice life thanks to BOSCH carbide technology;
fibreboard Example: Sawing through sheet metal, cutting through
screws in window frames
Hard ferrous metals, ex- Wide saw blade for sawing highly abrasive materials or
tremely abrasive materi- hard ferrous metals; long service life thanks to BOSCH
als, fibreglass, plaster- carbide technology;
board, cement-bonded Example: Cutting kitchen front covers, easy sawing
fibreboards, hardened through hardened screws and stainless steel
nails and screws
Hard ferrous sheet metal, Long saw blade for splinter-free separation and plunge
epoxy, plasterboard, cuts in sheet metal thanks to round sawing edge (Curved-
GFRP, CFRP, cement Tec); long service life thanks to BOSCH carbide techno-
fibreboard logy;
Example: Cutting through sheet metal, cutting through
screws in window frames
Gypsum boards, chip- Optimised for plunge saw cuts with a subsequent longer
boards, sandwich mater- separation cut; the Dual-Tec shape ensures a clean and
ial, wood complete cut both in the corners and during a longer sep-
aration cut;
Example: Plug socket recesses in gypsum boards or
wooden walls
Softwood, hardwood, Splinter-free separation and plunge cuts thanks to round
veneered boards, plastic- sawing edge (Curved-Tec) in coated boards or hardwood;
coated boards, non- Example: Shortening door frames, recesses in laminate
hardened nails and bolts flooring for a tray or built-in furniture, cutting through non-
hardened nails and bolts when flush with the surface
Wooden materials, Separation and plunge saw cuts;
plastic, soft and non-fer- also for sawing close to the edge in difficult-to-access
rous metals areas;
Example: Shortening already installed skirting boards or
door frames, plunge cuts when adapting floor panels
English | 21
1 609 92A 8RD | (07.08.2023)