ENGLISH
Thank you for purchasing the new infrared thermometer. In order to use this product safely
and correctly, please read this manual thoroughly, especially the Safety Instructions part.
After reading this manual, it is recommended to keep the manual at an easily accessible
place, preferably close to the device, for future reference.
The manufacturer guarantees that the product is free from any defect in material and
workmanship within one year from the purchase date. This warranty does not apply to damages
caused by accident, negligence, misuse, modification, contamination and improper handling.
The dealer shall not be entitled to give any other warranty on behalf of the manufacturer. If you
need warranty service within the warranty period, please contact your seller directly.
The manufacturer will not be responsible for any special, indirect, incidental or subsequent
damage or loss caused by using this device. As some countries or regions do not allow
limitations on implied warranties and incidental or subsequent damages, the above limitation of
liability may not apply to you.
Infrared thermometer can quickly and accurately determine the surface temperature by
measuring the infrared energy radiated from the target surface. It is suitable for non-contact
surface temperature measurement.
The D:S ratio is: 20:1
Warning:
To prevent eye damage or personal injury, please read the following safety instructions before
using thermometer:
• Please do not irradiate people or animals with laser directly or indirectly.
• Please do not look at the laser directly or through other optical tools (telescope, microscope,
etc.).
LASER RADIATION DO NOT STARE INTO BEAM
OUTPUT <1mW COMPLIES WITH EN60825-1:2014
Precautions:
• Do not look directly at the laser emitter.
• Do not disassemble or modify thermometer or laser.
• To ensure the safety and accuracy of thermometer, it should only be repaired by a qualified
professional using the original replacement parts.
• If the battery symbol on the LCD display is flashing, please replace the battery immediately to
prevent inaccurate measurement.
12
PREFACE
LIMITED WARRANTY AND LIABILITY
INTRODUCTION
SAFETY INSTRUCTIONS