embrace WAVE+ Manual De Usuario página 24

Step 4.
The display screen will indicate alarm 1 status (the default is OFF). You
can turn it on by pressing "▲" or "▼". Press " " to confirm your choice and
advance to set hour.
Step 5.
The hour will flash. Press "▲" or "▼" to select the hour. Press " " to confirm
your choice and advance to set minutes.
Step 6.
The minutes will flash. Press "▲" or "▼" to select the correct minutes. Press "
" to confirm your choice and advance to set alarm 2.
Step 7.
Set alarm 2 and 3 by following steps 4 through 6. After you have finished
setting up alarm 3, press " " to exit alarm setup.
23