Descargar Imprimir esta página

Hasselblad XCD 55mm f/2.5 V Guia De Inicio Rapido página 7

Publicidad

DISCLAIMER
Carefully read this entire document and all safe and lawful practices
provided before use.
WARNING
1. Keep the lens protected when used in rainy or humid environments
and DO NOT use in dusty environments. If dust or liquid gets inside
the lens, the performance may be negatively affected.
2. Place the camera and the lens on a flat surface. Otherwise, the camera
and lens may fall and be damaged.
3. DO NOT scratch the lens. Be sure to protect the lens during
transportation.
4. DO NOT place the lens under direct sunlight. Strong light may damage
the lens and may even cause a fire hazard.
5. When lifting the camera, always hold the camera body first, not the
lens.
INTRODUCTION
The XCD 2,5/55V lens is a HASSELBLAD
that features nine elements in eight groups including three aspheric
elements. The 43mm FF equivalent focal length delivers a top-class optical
performance with a compact build and supports an image resolution of
over 100 megapixels. A large aperture of f/2,5 makes it perfect for a wide
range of scenarios both indoors and outdoors.
• Upgraded leaf shutter: provides a shutter speed of up to 1/2000s and
delivers flash synchronisation at all speeds.
• Newly designed focusing module: for quick and accurate focusing.
• Push-pull focus ring: switch between AF and MF with a convenient push
and pull. The distance and DOF readings can be easily checked in MF
mode.
• Lens control ring: customised to quickly access your preferred function.
USAGE
Using the Focus Ring
The push-pull focus ring is used to adjust the focus modes by pushing the
ring to the front or pulling it to the rear.
Focus Ring Positions
Front: only MF available.
Rear: both MF and AF available. Switch between the modes by using the
corresponding button or dial on the camera body or adjusting the settings
on the camera display.
6
X System medium format lens
TM

Publicidad

loading

Productos relacionados para Hasselblad XCD 55mm f/2.5 V